The DPA260P is a DSP based 2 input x 6 output Digital
Loudspeaker management processor, ideally suited for fixed installations
and live events. It combines the functions of a multitude of
conventional products in a compact 1U unit with extensive PC remote
control capabilities.
Features Superb audio quality with premium
hi-end AKM5392 24bit A/D converters and AKM 4396 24bit D/A converters,
carefully optimized double precision signal processing coupled with
24bit conversion ensure a dynamic range >110db
The unit can
work in STANDARD MODE or in DCL MODE. The first mode permit to configure
the crossover in 2x2 way + SUB, 2x3 way or 6way, the input L, R, L+R
are freely assignable to each output.
In DCL mode the unit can be
configured in 3ch DCL, 2ch DCL + 2ch standard, 1ch DCL + 4ch standard.
DCL mode mean double compressor limiter, each DCL channel have a double
band limiter and compressor with assignable LO/HI split frequency. This
is an exclusive feature in digital processor and it’s very useful to
protect two way passive filters with no passive attenuation in the
crossover between LF woofer and HF driver. With DCL mode is possible to
set two different threshold of protection for woofer and driver with the
split frequency corresponding to the passive crossover frequency.
Each input has 5 fully configurable filters, a delay of 288.66ms max in step of 6.8us, gain.
Each
output has 4 fully configurable filters, a delay of 288.66ms max in
step of 6.8us, gain, phase, LO-pass/Hi-pass crossover from 6 to 24db/Oct
with standard or custom Q, RMS compressor with soft knee and peak
limiter.
The 2 input levels are displayed by rows of 6 level LED +
1 clip led, the 6 output levels are displayed by rows of 5 level LED + 1
clip led + 1 Limiter led. The unit has 2 analog inputs, a stereo
digital SPDIF input, and 6 analog outputs.
Linking functions between inputs and linking functions between outputs are available.
A function is allowing to have ramps closing the output level on parameter changes, when the
unit is used as installation unit; this function can be excluded when the unit is used live and it
is necessary to perform small changes to the set parameter...on the fly.
The
Pc SW for the remote control via RS485 or USB is allowing to connect in
net up to 32 units and is allowing to control full parameters of the
processor, to show the phase of the filter setting and to adjust
graphically the RMS compressor and the Peak limiter. The comprehensive
standard specification also include up to 64 memories with security
lockout and two password level settings.
UNTUK PEMESANAN BISA HUBUNGI 085213372138 FERDI
TERIMA KASIH
